Beichen Code: BC CT30
Features
Stainless steel resists wear well for the main body. Liner ceramics composed of alumina.
Dependability, low power consumption, and low-cost, easy maintenance.
Superior efficacy of separation and little fiber loss.
Maximizes floor area and is easy to connect and install.
Product specification
|
Product Name |
Stainless steel high density CT30 pulp cleaner |
|
Mill Code |
BC CT30 |
|
Category |
High density pulp cleaner/Hydrocyclone |
|
Paper type |
Paper, board, tissue |
|
Principle |
Vortex and centrifugal force |
|
Consistency ranges |
3.0% of the pulp slurry |
|
Application |
Recycled fiber cleaning and stock preparation |
|
Package |
Wood cage for cargo and ship transportation |
|
Material |
Cast iron/carbon steel/stainless steel Alumina ceramic for cones |
|
Debris can be removed |
Sand, grit, glass, staples, metal, and other heavy density materials |
|
Features |
Long-lasting materials, vertical installment for floor saving |
Contact salesman and technician for technical assistance
Product introduction
What is CT30 high density hydrocyclone cleaner for recycled paper pulp
A high density pulp cleaner called the BC CT30 hydrocyclone is used to prepare stock and clean recycled paper pulp. primarily be placed in the pulp mill's initial stage to handle high consistency slurry that includes heavy debris such as metals, glass, grit, and sand. This cleaner can handle a broad range of sizes and system configurations with consistencies up to 3.5%.
Why high density hydrocyclone cleaner
The fiber stream produced from OCC and other types of recycled paper is dense with a wide range of impurities. Destructive items such as metal and glass will attach themselves to the hydrocyclone in PA-66 and destroy it. For this reason, the OCC and recycled pulp mill require a high density hydrocyclone with a stainless steel body and ceramic linings.
Main Function
The primary purpose of the CT30 high density pulp cleaner is to gather and eliminate the heavier impurities from the fiber stream produced by OCC and recycled paper. Then, the materials are sent to the light consistency hydrocyclones for a subsequent cleaning step.
How it works
Sand, metal, glass, and metal clips are among the heavy pollutants that are successfully removed by the CT30 pulp cleaner, a free vortex type separator. Removing heavy contaminants from the fiber stream is the main purpose. Centrifugal force collects the undesirable, heavier particles and sends them to the bottom reject chamber. Little-weight accepts are streamed to the head and move on to the next stages.
Insights of the design
The design of the CT30 high density pulp cleaner is divided. It is composed of three or four parts: a reject chamber, a cone cartridge, an optional top cone adapter, and an intake head with a vortex design.
Materials
The main cleaner body and reject chamber could be made of carbon steel, stainless steel, or cast iron.
Thick, heavily wear resistant Alumina ceramic cones line the reject chamber and cone cartridge section.
Details regarding sale
We may provide the complete CT30 high density pulp cleaner set in a wooden box.
Separate replacement parts such as the reject chamber, cone cartridge, and intake head are available.
Related Service
In addition to general planning, we can perform size measurements, material inspections, and ceramic liner installation and repair.
Our sales engineer can help with the high density pulp cleaner installation and adjustment.
Why Choose Us
**Optimum solution for wide range product application
A variety of pulp cleaners are available from us for cleaning paper pulp slurry and stock preparation. We provide low density pulp cleaners, light and high consistency hydrocyclones, and pulp cleansers with high density pollutants. Additionally, we are able to provide wear spare parts for reject chambers, top shells, hoses, clamps, feed heads, and lower cones. To ensure the long-term functionality of our products, we build them with high-quality materials.
**Know-how technology
We know the consistency ranges, basic operating principles, and installation requirements for many types of pulp cleaners. Additionally, we produce ceramic cones with exceptional wear thanks to cutting-edge technology.
There are several varieties of ceramic dewatering elements that we are aware of, including felt suction boxes, low vacuum suction boxes, high vacuum suction boxes, Hydrofoil boxes, and forming boards. Ceramics made of alumina, SiC, and SiN are all known to have certain features. Good ceramic coverings and blades are ensured by the knowledgeable experts who attach and grind them.
**Skilled and focusing operation
Beichen focuses on all manufacturing processes, such as ceramic attachment, CNC grinding of guide rails, inspection, cone isostatic pressing, and CNC and hand grinding.
This can guarantee that all products last a long time, help customers increase their total production capacity, and save operational expenses.
FAQS
Find more Beichen Products
Pulp Cleaners
Spare Parts
Ceramic Dewatering Elements
Classic Products of Beichen Company
Insights of products manufacturing
Corporate Purpose
Capture the opportunity to enjoy Beichen's sincere service
Create one chance for Beichen to exhibit excellent technology
Hot Tags: stainless steel high density ct30 pulp cleaner, China stainless steel high density ct30 pulp cleaner manufacturers, suppliers, factory, RB300 High Density Pulp Cleaner, stainless steel cone, Light Consistency Hydrocyclone TC SC 133 Pulp Cleaner, pulp cleaners, Ceramic Dewatering Element High Vacuum Suction Box, Ceramic Dewatering Elements Deflector Strips Blades
