Name: China CLP700 Hydrocyclone Pulp Cleaner Manufacturers Suppliers Factory - Made in China
Brand: Beichen
SKU: 250346508

Beichen Code: BCCLP700

Features

Outstanding Excellent pulp slurry separation efficiency

With a high accept rate and low reject rate, an inventive system design can minimize fiber loss.

Durable wear components and consistent performance

Simple and inexpensive upkeep, split design assembly and replacement

A pulp and paper factory with extensive cost savings and little energy consumption

Product specification

Product Name	CLP700 hydrocyclone pulp cleaner
Mill Code	BCCLP700
Category	Hydrocyclone
Type	Forward cleaner
Application	Pulp cleaning, stock preparation
Pulp type	Wood pulp, waste paper pulp
Consistency	Light consistency 0.3~1.2%
Working principle	Centrifugal force pulp cleaning and stock preparation
Divided spare parts	Al2O3 ceramic cone, NYLON cone
Density	Light density
Debris remove	Grit, glass, sand, pins, staples, metal

Working Principles

BCCLP700 high efficiency forward pulp cleaner

For the purpose of preparing stock, the BCCLP700 centrifugal pulp cleaner separates useful fiber from debris.
Pulp slurry with fiber, water, and debris enters the cleaner's top through a pressure and flow-controlled inlet head. The cleaner's entire contents spin as the slurry quickens and spirals down the inner wall. Water and heavy debris like grit, glass, sand, staples, pins, mud, gravel, metal, abrasives, and other small heavy things are drawn to the outside wall and spiral down to the bottom of the unit by centrifugal force.

Divided design

The BCCLP700 pulp cleaner has a divided design that allows it to be divided into individual spare pieces, making replacement, assembly, and disassembly simpler. Easy maintenance is required during the pulp cleaning and stock preparation process; worn parts can be replaced without replacing the pulp cleaner as a whole.

Cases of BCCLP700 pulp cleaner

Product introduction

What is BCCLP700

For cleaning pulp slurry and stock preparation, the very effective forward hydrocyclone pulp cleaner BCCLP700 is employed. For contaminants that weigh relatively little, the operating slurry consistency ranges from 0.3% to 1.2%.
Valuable fiber is separated from debris inside the cleaner wall by centrifugal force. Once pulp slurry enters the hydrocyclone cleaner through the inlet head, heavy objects descend to the bottom and are retrieved. Accepts are diluted from the bottom and either collected using the top tube, or they proceed to the next steps.
The BCCLP700 can be used in conjunction with later stages of lighter consistency cleaner to increase the overaccepts production, or it can be used as a single independent stage with separate cleaner fiber recovery.

Insights of the divided-part design

The BCCLP700 pulp cleaner can be disassembled into separate wear parts: inlet head, upper shell, uppup cone, ceramic cone, stock saver and reject chamber. Throughout the entire operating process, it is considerably easier to assemble, disassemble, and replace this segmented design. Isolate valves make it simple to swap out worn spare parts without having to suspend the entire set. This lessens the impact of replacement and maintenance and ensures the stable operation of all installed equipment. Simple to connect to and install. For operation and maintenance purposes, the individual cleaner can be linked with a nut or flange to the entire pulp cleaning set.

Materials and manufacturing technology

The quality of the materials is the basis of products. The input chamber, upper shell, and connect nuts are made of NYLON PA66. High wear resistant ceramic cones are applied to the interior for long-lasting performance. Ceramic cones made with isostatic pressing method have a three-time lifespan compared to other materials.

Details regarding sale

We may provide a fully assembled pulp cleaning equipment in bank quantities, packaged in a wood box for both road freight and maritime transit, in relation to the sale and delivery of BCCLP700 commodities. For daily manufacturing operations, replacement, maintenance, and spare parts storage, customers can also receive separate spare wear components.

Related Service

24/7 assistance is offered both prior to and following the sale.
For services provided prior to purchase, we can provide technical support for general planning, requirements for pulp cleaning, installation, and on-site measurement.
We provide rebuild, modification, and maintenance services as after-sale support.

Why Choose Us

**Selected materials

All of our goods, including pulp cleaners, ceramic dewatering components, and maintenance parts, are made using premium materials like alumina powder, SiC ceramic, and SiN ceramic from the beginning.
The FRP with high strength, carton steel, and stainless steel all demonstrate superior quality.
For excellent finished goods, they supply the structure.

**Know-how technology

We are aware of the installation requirements, consistency ranges, and operating principles for various pulp cleaner kinds. Additionally, we use the best technology available to create ceramic cones with good wear.
We are aware of the various varieties of forming boards, Hydrofoil boxes, flat suction boxes, low vacuum suction boxes, high vacuum suction boxes, and felt suction boxes for the ceramic dewatering components. Our knowledge of the properties of SiC, SiN, and alumina ceramics is extensive. Expert specialists who specialize in attaching and grinding are the assurance of superior ceramic coverings and blades.

**Skilled and focusing operation

Throughout the whole manufacturing process, from raw material selection to cone pressing and grinding, ceramic attachment and guide rail grinding, and inspection, we follow focused operations.
This guarantees that all products function properly over time and helps customers reduce their overall operating expenses.

**Strict Inspection

Every product needs to be thoroughly inspected before shipping.
We inspect all pulp cleaners, spare parts, and ceramic dewatering elements, paying particular attention to the size, material, and technical specifications specified in the drawings.

**Comprehensive service

We provide service before and after sale, for providing better solutions to clients.

FAQS

Q: Are you a manufacturer or a trading company?

A: Established in 1990s, Zibo Beichen Ceramics Apparatus Co.,Ltd is a leading manufacture of pulp cleaners, spare parts and ceramic dewatering elements for nearly 30 years.

Q: Can I get a free sample?

A: Not available, but spare parts can be supplied for quality testing.

Q: Do you accept small orders?

A: Yes, If you are a builder or small retailer or starting up a business, we are definitely willing to grow up with you. And we are looking forward to co-work with you for a long-term relationship.

Q: What's your MOQ?

A: 1 piece for ceramic cones, 1 piece for whole pulp cleaner, 1 piece for ceramic blades, and 1 set for ceramic dewatering cover

Q: How long is your delivery time?

A: Products with stock: 5~10 days. Customized products: 20-45 days.
We have two production mills and 5 advanced production lines.
100% on-time delivery.

Q: How do you guarantee the quality?

A: Each product has strict testing procedures (from raw material selection, manufacturing, quality checking, packing, and loading,etc.), and must be 100% quality checked before delivery.

Q: Can you do OEM?

A: Yes, we not only do OEM but also do ODM. We can customize your logo onto the product package.

Q: What else can you provide?

A: We can also provide other types of pulp cleaner, varied spare parts of high and low consistency pulp cleaners, ceramic dewatering boxes, covers and blades.